PIR with enclosure one or many per installation

The PIR assembly includes the daylight sensor on the front face of an IP67 ABS enclosure. In the enclosure is an engineer adjustment trim pot, which will be factory set and should not require on site alteration except in areas which are particularly shaded or bright. 

The motion detection function can be provided by one or many PIRs. Requires 12v DC plug top adaptor provided. Once activated, any PIR will activate all LEDs and PODs in a system.  The switching function is not performed within the PIR enclosure, but an in-line relay at the transformer location.

A bus connection is made between all PIR enclosures and in-line relays.  The bus uses three pin waterproof connectors and the bus cable is shielded as a twisted pair.

Inline PWM RGB driver module-Male 2 pole - female 4 pole one per transformer

CODE:	180929A
Sold As:	EACH
Only 13 left in stock

£46.00

In line relay module one per transformer

CODE:	1809IR
Sold As:	EACH
Only 24 left in stock

£30.00