{"id":11897,"date":"2025-07-24T14:44:30","date_gmt":"2025-07-24T13:44:30","guid":{"rendered":"https:\/\/www.fhbrundle.co.uk\/lp\/?page_id=11897"},"modified":"2026-02-25T12:59:52","modified_gmt":"2026-02-25T12:59:52","slug":"composite-cladding","status":"publish","type":"page","link":"https:\/\/www.fhbrundle.co.uk\/lp\/rinato\/composite-cladding\/","title":{"rendered":"Composite Cladding"},"content":{"rendered":"

View the range<\/strong><\/a><\/span><\/p>\n<\/div><\/div><\/div>

Why use Cladding<\/a><\/b><\/span><\/p>\n<\/div><\/div><\/div>

Cladding system<\/a><\/b><\/span><\/p>\n<\/div><\/div><\/div>

Applications<\/a><\/b><\/span><\/p>\n<\/div><\/div><\/div>

Installation docs<\/a><\/b><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div>

\"rinato<\/span><\/div><\/div><\/div><\/div><\/div>
\"rinato<\/span><\/div><\/div><\/div><\/div><\/div>

Low-cost, versatile composite infill boards<\/h2><\/div><\/div><\/div><\/div><\/div>

View the range<\/strong><\/a><\/span><\/p>\n<\/div><\/div><\/div>

Why use WPC<\/a><\/b><\/span><\/p>\n<\/div><\/div><\/div>

Cladding System <\/a><\/b><\/span><\/p>\n<\/div><\/div><\/div>

Rinato gallery<\/a><\/b><\/span><\/p>\n<\/div><\/div><\/div>

Installation docs<\/a><\/b><\/span><\/p>\n<\/div><\/div><\/div>

FREE Samples<\/b><\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div>

Our WPC cladding boards utilise the same advanced co-extrusion technology as our natural range of deck boards. The cladding looks completely natural, is low maintenance, and is easy to clean (unlike timber cladding). It is important to allow for the expansion and contraction of the boards in different temperatures – we recommend that batons are used to support the cladding every 500mm.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

Premium composite cladding from<\/h5>\n<\/div><\/div><\/div>
<\/div><\/div><\/div>
Ex VAT<\/h6>\n<\/div><\/div><\/div><\/div><\/div>
Premium composite cladding from<\/h5>\n<\/div><\/div><\/div>
<\/div><\/div><\/div>
Ex VAT<\/h6>\n<\/div><\/div><\/div><\/div><\/div>
\"Cladding\"<\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>
<\/a><\/span><\/div><\/div><\/div><\/div><\/div>

Select your composite infill boards<\/h2>\n<\/div><\/div><\/div><\/div><\/div>

13mm Cladding solid boards<\/b><\/p>\n

Composite infill boards from stock – 140 x 13 x 3600mm available in 3 colours: \u00a0Antique, Charcoal and Walnut<\/span><\/p>\n<\/div>

View all boards<\/span><\/a><\/div><\/div><\/div>
\"composite<\/span><\/div><\/div><\/div><\/div><\/div>

Antique<\/strong><\/p>\n<\/div>

<\/a><\/span><\/div><\/div><\/div><\/div>

Charcoal<\/strong><\/p>\n<\/div>

<\/a><\/span><\/div><\/div><\/div><\/div>

Walnut<\/strong><\/p>\n<\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div><\/div>

Price per 3600mm board<\/strong><\/p>\n<\/div>

<\/div>

ex VAT<\/p>\n<\/div><\/div><\/div><\/div><\/div>

View the full Rinato board range<\/span><\/a><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div><\/div><\/div>

Why choose composite cladding?<\/h2>\n<\/div><\/div><\/div><\/div><\/div>

Our WPC cladding boards utilise the same advanced co-extrusion technology as our natural range of deck boards. The cladding looks completely natural, is low maintenance, and is easy to clean (unlike timber cladding). It is important to allow for the expansion and contraction of the boards in different temperatures – we recommend that batons are used to support the cladding every 500mm.<\/p>\n

Our cladding boards are available in 3 colours: Antique, Charcoal and Walnut, with a contemporary embossed wood effect. Every board is UV resistant, will not fade, and is made from recycled, eco-friendly FSC\u00ae certified wood composite. The boards can be installed vertically or horizontally, using our clever hidden fixing system and the range of trims to allow for the system to be installed on any wall.<\/p>\n

While composite woods are highly durable it is recommended to follow the guidelines when storing, handling and installing the composite cladding products to ensure their lasting beauty.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

<\/i><\/i><\/span>Read more<\/span><\/a><\/h4><\/div>
\n

Storage:<\/p>\n

\u2022 Materials should be covered until ready to install to ensure a clean surface
\n\u2022 All products shall be stored flat and supported above the ground at 500mm intervals starting at the ends
\n\u2022 Battens used to separate and support the cladding material should be spaced no greater than 500mm
\n\u2022 Supporting battens used in storage should align through the stack to equally transfer the load to the ground
\n\u2022 Where pallets are delivered these should not be stacked more than four pallets (or 3m) high<\/p>\n

Handling:<\/p>\n

\u2022 Cladding materials should be placed and not dumped when unloading
\n\u2022 Lift and set boards down rather than sliding the boards to avoid damage
\n\u2022 Carry the cladding boards on their edge for better support
\n\u2022 During installation, do not slide or drag any equipment across the boards
\n\u2022 The surface of the cladding boards should be kept free of construction debris and material to prevent damage to the boards.<\/p>\n

Prior to installing any composite cladding system it is recommended that you check with local building codes for any special requirements or restrictions. The diagrams and instructions outlined in this guide are for illustration purposes and are not meant or implied to replace a licensed professional.<\/p>\n

Safety:
\n\u2022 Always wear safety glasses and relevant Personal Protection Equipment (PPE)
\n\u2022 When cutting and installing boards it is advised to wear gloves, a respiratory mask, long sleeves and trousers
\n\u2022 Static build- up is a natural occuring phenomenon that can occur with many composite products. Dry and windy environments may make this more apparent. The levels of static build up will not cause personsal injury
\n\u2022 The composite boards CANNOT be installed directly onto a flat surface. They must be installed onto a substructure to allow adequate and unobstructed air fow under the cladding to prevent excessive water absorption. A minimum of 25mm clearance beneath the cladding should be provided to promote drainage and drying
\n\u2022 Excessive heat on the surface of the composite cladding products from external sources such as (but not limited to) fire or refection of sunlight from energy efficient window products such as Low-E glass can cause an unusual heat build-up on exterior surfaces. The rise in surface temperature from Low-E glass to adverse levels is deemed extremely rare due to the prevailling climate. Excessive heat exposure can cause the boards to sag, warp, discolour, increase expansion\/ contraction, accelerate weathering, and in extreme circumstances, melting of the board<\/p>\n

Use:
\n\u2022 Standard woodworking tools may be used. It is recommended that all blades have a carbide tip. Stainless steel or acceptable coated screws are recommended
\n\u2022 Plan a layout for your cladding before starting to ensure the best look is achieved. Pay particular attention to interfaces with doors, windows and soffits in order to determine the optimal starting position for the first boards
\n\u2022 Composite cladding boards are not intended for use as columns, support posts, beams, joist stringers or other primary load-bearing members
\n\u2022 Boards must be supported by a compliant substructure and CANNOT be installed onto existing cladding boards
\n\u2022 All fixings should be fastened at a 90 degree angle to the cladding system
\n\u2022 Use white chalk, straight boards or string lines as templates. NEVER use coloured chalk on the boards as this can cause permanent staining
\n\u2022 All recommended fixings are available from us. Please visit www.fhbrundle.co.uk for more information.<\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>

<\/div><\/div><\/div><\/div><\/div><\/div><\/div>

Rinato composite cladding system<\/h3>\n<\/div>

Our WPC cladding boards utilise the same advanced co-extrusion technology as our natural range of deck boards. The cladding looks completely natural, is low maintenance, and is easy to clean (unlike timber cladding). It is important to allow for the expansion and contraction of the boards in different temperatures – we recommend that batons are used to support the cladding every 500mm.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

<\/a><\/span><\/div><\/div>
Board (13 x 140 x 2400\/3600mm)<\/h6>\n<\/div>
<\/div><\/div><\/div>
<\/a><\/span><\/div><\/div>
Finishing Board (70 x 10 x 3600mm)<\/h6>\n<\/div>
<\/div><\/div><\/div>
<\/a><\/span><\/div><\/div>
End Trim (47 x 45 x 3600mm)<\/h6>\n<\/div>
<\/div><\/div><\/div><\/div><\/div>
<\/a><\/span><\/div><\/div>
Angle Trim (55 x 55 x 3600mm)<\/h6>\n<\/div>
<\/div><\/div><\/div>
<\/a><\/span><\/div><\/div>
In-Line Joint Trim (79 x 26 x 3600mm)<\/h6>\n<\/div>
<\/div><\/div><\/div>
<\/a><\/span><\/div><\/div>
Clips & Screws<\/h6>\n<\/div>
<\/div><\/div><\/div><\/div><\/div>

Due to the natural expansion and contraction of the composite material with changes in ambient temperature and humidity, please ensure the following gap requirements for all composite cladding products are achieved.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

Explore Full Range<\/span><\/a><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div>

Installation for composite cladding boards<\/h3>\n<\/div><\/div><\/div><\/div><\/div><\/div>

Spacing Boards & Joists:<\/h3>\n