{"id":2525,"date":"2019-11-22T00:00:00","date_gmt":"2019-11-22T00:00:00","guid":{"rendered":"https:\/\/www.fhbrundle.co.uk\/lp\/2019\/11\/22\/how-to-install-panelgrip-frameless-glass-balustrade-system\/"},"modified":"2019-11-22T00:00:00","modified_gmt":"2019-11-22T00:00:00","slug":"how-to-install-panelgrip-frameless-glass-balustrade-system","status":"publish","type":"post","link":"https:\/\/www.fhbrundle.co.uk\/lp\/blog\/2019\/11\/22\/how-to-install-panelgrip-frameless-glass-balustrade-system\/","title":{"rendered":"How to Install PanelGrip\u00ae Frameless Glass Balustrade System"},"content":{"rendered":"
    \n
  1. Prior to installation ensure that all surfaces are clean<\/li>\n
  2. Cut channel to length and mitre any angles as required<\/li>\n
  3. When fitting the channel you should start from the front and work your way back to the wall or structure<\/li>\n
  4. Mark through the fixing holes where you will drill to fix channels. This should be 203.2mm (8\u201d) apart<\/li>\n
  5. Drill a fixing hole to give yourself a mark for fixing channel to base<\/li>\n
  6. After drilling, ensure that all dust and debris is removed before fastening down<\/li>\n
  7. Secure the channel into place using the appropriate fixings, do not completely tighten at this stage, hand tight is sufficient<\/li>\n
  8. Use our levelling tool kit to ensure the channel is completely level<\/li>\n
  9. Shims should be used to level as required<\/li>\n
  10. Tighten all fixings<\/li>\n
  11. Once the channel is correctly positioned and secured into place, insert the black part of the dry mount PanelGrip. Spread them evenly, no more than 200mm apart<\/li>\n
  12. You can now start to install your glass panels<\/li>\n
  13. Position the aluminium part of the PanelGrip opposite the black part and tighten with a 3\/16\u201d Allen key<\/li>\n
  14. The glass panels should be spaced 30mm apart<\/li>\n<\/ol>\n

    Gaps and spacing between glass panels<\/strong><\/p>\n

    F.H. Brundle tend to use glass panels of up to 1.2 metres wide. Glass runs are made up of more than a single sheet. Reasons for gap and spacing are:<\/p>\n

      \n
    • Lesser chance of trapping fingers between glass, 30mm is wide enough for most fingers to pass through easily.<\/li>\n
    • Easier to install.<\/li>\n<\/ul>\n
        \n
      1. Continue the process until all glass panels have been fitted<\/li>\n
      2. Where the channel sections meet, the glass panel must have an overlap of at least 450mm<\/li>\n
      3. If you are finishing with cladding, remove the protective strip from the back of the gasket, then secure it into place on the cladding before fitting.<\/li>\n
      4. Secure the cladding to the channel using our double-sided tape (two strips parallel to edge)<\/li>\n
      5. If you are not finishing with cladding, you should also use the gasket which pushes into place between the glass and the channel<\/li>\n
      6. If you are fitting end caps, use our double-sided tape to fix them to the channel<\/li>\n
      7. You can finish your balustrade using our range of split tube handrail fittings<\/li>\n<\/ol>\n

        Hints<\/strong><\/p>\n

          \n
        • When using toughened glass we recommend a handrail be used<\/li>\n
        • When using laminated glass checks should be made for suitability using our Glass Loading Sheet 7.2 which can be found on our website https:\/\/www.fhbrundle.co.uk\/groups\/GLASSPNS__Glass_Panels<\/a><\/li>\n<\/ul>\n

          Visit <\/strong>https:\/\/www.fhbrundle.co.uk\/groups\/PANGRIP__PanelGrip_Dry_Glaze_Glass_Balustrade_System<\/a> to see our PanelGrip range<\/p>\n

          We also supply standard glass panels up to 12mm thick and offer a bespoke glass service up to 21.5mm thick, so the hassle is out of your hands. Choose between our toughened monolithic glass and toughened laminated glass with our easy What Glass Do I Need?<\/a> Guide.<\/p>\n

          Need a quote? Liveconfigurator\u2122 is easy to use\u00a0and can design and configure our glass balustrades to your own sizes. We provide quotes in minutes and configure a set of fully detailed Free CAD drawings for your glass balustrade, to\u00a0your<\/em>\u00a0dimensions. As a result, you receive exactly what you need to design and complete your project. Liveconfigurator\u2122 saves valuable time and helps to avoid costly mistakes, and most importantly, it\u2019s\u00a0FREE to use!<\/p>\n

          Visit https:\/\/liveconfigurator.co.uk\/<\/a> \u00a0to generate a quote for your stainless steel or glass balustrade systems in minutes.<\/p>\n

          https:\/\/www.youtube.com\/watch?time_continue=197&v=xbqkvQf6IYE<\/a><\/p>\n<\/div>