Roof edge protection must be formally inspected, tested, and re-certified at least once every 12 months by a competent person. Annual statutory compliance checks are required under the Provision and Use of Work Equipment Regulations (PUWER) 1998. Because roofs are exposed to extreme weathering, thermal movement, and high winds, the annual inspection verifies:

  • Physical structural integrity and torque levels of all slip-on clamp fixings.
  • Total absence of severe corrosion or material degradation.
  • Correct positioning and security of all counterweights on freestanding models.
  • Compliance documentation is updated to shield the building operator from liability.