The UK's widest range of metal products for trade and domestic customersHandrailing & BalustradeRoof Edge Guardrail

Roof Edge Guardrail

Our working at height safety section provides several simple, flexible and cost-effective solutions to help reduce the risks associated with working at height. Our products are specifically designed to allow the user to safely work from scaffolds, towers, roof tops and ladders.

Our rapid installation roof edge protection can now be designed and calculated to meet the new BS 13700 counterweighted guardrail systems standard. The roof edge protection system requires no fixings, welding or drilling, and subsequently no repair to the roof membrane. It is suitable for flat or nearly flat roofs. The system operates on a counterbalance principle using PVC counterweights as the main component. A galvanised foot supports the handrail post, this includes an integral toe plate facility, which is a requirement if there is no perimeter edge upstand. This product complies with BS EN ISO 1461, BS EN 14122-3:2001 & EN 13374 and features a bolt on toe plate facility to comply with HSG 33. The maximum component weight is 25kg and this product is for use on asphalt, coated steel sheet or concrete, mineral felt roofs.

Roof Edge Protection Technical PDF

Showing 1-4 of 4
  • Defender
    Defender Roof Edge Protection is a system that requires no fixings or drilling and subsequently no repair to the roof membrane. It is suitable for flat or nearly flat roofs. The system operates on a counterbalance principle using curved PVC counterweights as the main component.
    Top ProductsView more
    48.3mmx3.25mm
    Galvanised 'D' Tube 48.3mm x 3.25mm In Lengths Of Approx 6.5 Metres
    £ 38.30
    1100mmx48mm
    Roof Edge Protection Post 1100mm x 48mm C/W Counterweight, Collar & 1.575m Tube
    £ 160.20
    1100mmx48mm
    Roof Edge Protection Post 1100mm x 48mm Assembled
    £ 63.00
    Tubeclamp 125D 90 Degree Elbow
    £ 4.60
    Counterweight Incl. 1 Weight & 1 Locking Collar & 1.575m Tube
    £ 97.30
    1100x48mm
    Roof Edge Protection Endpost 1100 x 48mm C/W 2 x Weights, Collar & 1.575m Tube
    £ 238.60
    Run End Weight (42.4mm)-Incl. 2 Weights 1 Bar - 1 Tee/2 Collars & 1.575m Tube
    £ 175.60
    Tubeclamp 149D Sleeve Joint
    £ 4.60
    Counterweight Incl. 1 Weight - 1 Locking Collar & 1.075m Tube
    £ 90.30
    1100mmx48mm
    Roof Edge Curved Post 1100mm x 48mm C/W Counterweight, Collar & 1.075m Tube
    £ 255.50
    Tubeclamp 133D Plastic Stop Ends 48.3mm O/D - For 3.2-5.0mm
    £ 0.27
    1100mmx48mm
    Roof Edge Curved Post 1100mm x 48mm Assembled - With 3 Cradles
    £ 165.30
    Defender Roofedge Protection - Economy System
    £ 76.70
    Defender Roofedge Protection - Plus System
    £ 104.30
    Defender Roofedge Protection - Standard System
    £ 89.40
  • Foldshield
    Foldshieldr is the perfect solution for free standing edge protection when working on roofs. It can be easily folded, so it does not reduce the buildings aesthetics. Designed for use on slopes up to 10°, this folding system is suitable for use on asphalt, concrete, mineral felt or PVC sheet covered roofs and complies with the re...
    Top ProductsView more
    48.3mmx3.25mm
    Galvanised 'D' Tube 48.3mm x 3.25mm In Lengths Of Approx 6.5 Metres
    £ 38.30
    48.3mmx3.25mm
    Galvanised 'D' Tube 48.3mm x 3.25mm Special Cut Length 3.0m
    £ 20.00
    Tubeclamp 125D 90 Degree Elbow
    £ 4.60
    Counterweight Incl. 1 Weight & 1 Locking Collar & 1.575m Tube
    £ 97.30
    Tubeclamp 150D Internal Joint
    £ 4.00
    Run End Weight (42.4mm)-Incl. 2 Weights 1 Bar - 1 Tee/2 Collars & 1.575m Tube
    £ 175.60
    Tubeclamp 149D Sleeve Joint
    £ 4.60
    Counterweight Incl. 1 Weight - 1 Locking Collar & 1.075m Tube
    £ 90.30
    Tubeclamp 133D Plastic Stop Ends 48.3mm O/D - For 3.2-5.0mm
    £ 0.27
    42.4mmx3.25mm
    Galvanised 'C' Tube 42.4mm x 3.25mm Special Cut Length 1.075m
    £ 8.70
    1100mmx48mm
    Roof Edge Protection Post 1100mm x 48mm Assembled with hinged Base Foot
    £ 66.50
    Foldshield Base
    £ 56.50
    Cradle Fitting
    £ 15.30
    Freestanding Roofedge Protection - Foldshield System
    £ 91.10
  • Topfix
    Topfix provides a roof edge protection solution for metal profile and standing seam roofs up to 45° pitch. The specially designed base plate, which incorporates multiple fixing centres, allows installation to a wide range of popular roofs.
    Top ProductsView more
    48.3mmx3.25mm
    Galvanised 'D' Tube 48.3mm x 3.25mm In Lengths Of Approx 6.5 Metres
    £ 38.30
    48.3mmx3.25mm
    Galvanised 'D' Tube 48.3mm x 3.25mm Special Cut Length 3.0m
    £ 20.00
    Tubeclamp 125D 90 Degree Elbow
    £ 4.60
    Tubeclamp 149D Sleeve Joint
    £ 4.60
    Tubeclamp 129D Adjustable Short Tee
    £ 6.60
    Tubeclamp 133D Plastic Stop Ends 48.3mm O/D - For 3.2-5.0mm
    £ 0.27
    Cradle Fitting
    £ 15.30
    Tubeclamp 151D Angle Base Flange Fitting
    £ 14.40
    Top Fix Base Plate
    £ 97.40
    1100mmx48mm
    Roof Edge Protection Post 1100mm x 48mm Assembled with Railing Base Flange
    £ 51.80
    Rivets - for Top Fix Base Plate Per 100
    £ 191.60
    M12 Galvanised Fixing Set With nut bolt and washer
    £ 0.33
    Fixing Pack 1.5m Traverse(Standing Seam)
    £ 16.20
    Butyl Sealing Strip (15M Roll)
    £ 20.00
    1.5m Longitudinal 0 - 5 Deg. Slope
    £ 219.90
    1.5m Steps 25 - 35 Deg. Slope
    £ 359.10
    3m Free Standing 0 to 5 degrees Up to 95 mph winds
    £ 758.30
    3m Longitudinal 0 - 5 Deg. Slope
    £ 437.20
    Fixing Pack 1.5m Step/Long (Profile)
    £ 7.80
    Fixing Pack 3m Step/Long(Standing seam)
    £ 42.90
    Fixing Pack 1.5m Step/Long-Standing seam
    £ 21.90
    •

    New EU legislation requires us to inform you that we use cookies. Our use of cookies is limited, but you may wish to read our policy before continuing. Please click OK to dismiss this message.