Bracing Strap Set For Planters Up to W1200mm

Bracing straps have been designed to assist with the installation of your chosen planter installation. One Bracing strap set (two lengths) will span as a cross brace between the two joins as shown. The braces run diagonally from the top of both straight joins to the bottom of the opposite straight joins. You should ideally include a brace strap set on each straight panel join.

These are designed to cater for different spans, simply breakaway to you required span by hand, by bending back and forth, then attach with lock pins supplied. Cross bracing with the bracing strap set works when opposing straight joins are 1200mm or less apart. This means a free standing bed can be created with this internal bracing approach.

The bracing strap set accommodates different widths up to 1200mm, and is simply snapped off for the correct span (repeatedly bend back and forth to snap point) and fitted between the available lock in holes.

For raised garden beds wider than 1200mm the cross bracing strap set is too short, so either a universal bracing set or a ground post -1100mm and anchors can be used to brace each straight join.