Defender | Roof Edge Protection System
Defender Roof Edge Protection is a system that requires no fixings or drilling and subsequently no repair to the roof membrane. It is suitable for flat or nearly flat roofs. The system operates on a counterbalance principle using curved PVC counterweights as the main component. A galvanised malleable iron foot supports the handrail post, this includes an integral toepate facility which is a fundamental requirement if there is no perimeter edge upstand.
Features
- TUV Certificate no. Z1A 04 03 50796 001
- Satisfies the CEN harnonised European standard BS EN ISO 14122-3:2001
- Rapid installation
- 25kg maximum component weight
- No welding or bending required on site
- No special tools required
- Bolt-on toeplate facility to comply with HSG 33
- For use on asphalt, coated steel sheet or concrete mineral roofs. The system is effectively maintenance free with galvanised to BS EN ISO 1461 malleable iron fittings, PVC counterweights & galvanised tube
Roof Edge Protection Technical pdf
Roof Edge Protection Assembly.pdf
Roof Edge Curved Post 1100mm x 48mm C/W Counterweight, Collar & 1.075m Tube
| Code: | 16REG40SS |
|---|---|
| Sold As: | EACH |
Roof Edge Protection Endpost 1100 x 48mm C/W 2 x Weights, Collar & 1.575m Tube
| Code: | 16REG40E |
|---|---|
| Sold As: | EACH |
All prices shown are exclusive of VAT @ 20%
